Boats&Barcos - An authorised reseller of Anchorlift products

Anchorlift is the complete windlass system. Anchorlift windlasses and windlass accessories are made with the highest quality materials. Anchorlift has more than 2 generations of experience manufacturing and distributing windlass systems and windlass accessories for the marine industry. From small boats to super yachts and from sailboats to power boats, Anchorlift has a variety of windlass system solutions for your boating needs. Plus, all Anchorlift windlasses are covered by a 5 Year Warranty.

Below you will see a selection of stock that we have available.

Please contact us for prices and delivery options.

XR anchors
XR anchors

Anchorlift new XR anchor is specifically designed to get the anchor parked so close to the bow as possible.
The special design of anchor wing allows the anchor not beating in the bow when parked in roller.
Anchor arm also has its function in that the anchor goes out and clear of the bow before it goes down.
Low weight has also been important without it having gone out of the anchor’s holding power,
as this is intended to be used on sport fishing boats and other boats which will have as little
weight in the bow as possible. Anchorlift XR anchor is made of the same physical sizes as the famous Bruce
anchor, but the weight is only about 60% compared with the Bruce anchor.
Anchorlift XR anchor is made of Aisi 316L high polish stainless steel. European made.

Also available in black.

Claw X (CX) anchors

Higher holding power, Less weight.

Our NEW Claw X anchor is based on the famous Bruce anchor, which was originally made for oil riggs in the North Sea.
Sets fast and secure to almost any bottom conditions. Made in one piece. Available in stainless steel AISI 316L.
CX anchor are not casted but made of stainless steel 316L plates for best corrosion protection and strenght.
Wing size is 25% larger on CX anchors than on the corresponding Bruce size for best possible holding power. European made.

More information - sizes & weights
TPX18RB-web
TPX™ anchors

Anchorlift TPX™ anchors are exceptionally effective in a variety of sea beds. Work very well with Anchorlift bow rollers, which give you a self launching system.
Release the anchor without the need to leave the controls. Remains stable in various tidal conditions.
Available in high polished stainless steel AISI 316L made from steel plates not by casting for maximun strenght and corrision protection.
Sizes from 7 kg to 128 kgs. According to our testing, the TPX™ anchors holds up to 60% more weight than our competitor’s counterpart, the Bruce anchor. TPX™ comes with an removable rollbar, ideal for bow sprit and bow plank mounting. European made.

More information - sizes & weights
PX anchors

Higher holding power, Less weight.

PX anchor is based on the famous HHP type anchors.
Sets fast and secure to almost any bottom conditions. Available in stainless steel AISI 316L.
PX anchor are not casted but made of stainless steel 316L plates for best corrosion protection and strenght.
European made.

More information - sizes & weights

Anchor Turner Connectors (with swivel)
Anchor Connectors (with swivel)

Stainless steel AISI 316L anchor connectors with swivel. With an anchor connector swivel attached to the anchor it is impossible for the chain to get twisted.
Anchorlift swivel has bronze bearing inside make it also spin when load on it, which is not the case for other well know swivels.
The sleek shaped joint allows perfect sliding of the anchor through the roller with no risk of damaging any components.
Fits Anchorlift TPX, XR, CX, Delta, Bruce, Pool and Holding anchors up to 250 kgs/ 550 lbs.

DD5 Swing / Tilt Davit for Scooters and Rib Dinghys

Swing and tiltable jet ski and rib dinghy davit for swimplatform. Jet Ski and Rib dinghy up to 225kg 300cm

: Easy removable by only 4 bolts, making just four mounting plates left on the swim platform.
: Davit stays in horizontal position when swinged out 45 degree make you take your jet / dinghy up closer to the platform.
: Large 375mm / 15″ turning disk for easier swing when heavy load.
: 70cm from hinged point to end, better launching for high mounted swim platforms.
: Made in 30mm stainless steel tubing 316L, high gloss polish, yacht quality.
: No plastic or aluminium parts.
: Made in Europe.

More information - sizes & weights
DD3 Adjustable davit for Scooters and Rib dinghy

Davit for jet ski and rib dinghy that has hydraulic swim platform or crane to lift the scooter / dinghy in place.
Fully adjustable V shape bow davit and flat bottom stern davit for steady storage.
Made in heavy duty high polish 316L 3mm stainless steel plate with 5mm rubber on top. Easy removable. Made in Europe.

More information - sizes & weights
DS3-full
DS3 Dinghy davits for Sail and Motor boats

Easy to use universal davits for most sail and motor boats.

Dinghys up to 300cm – 10ft model DS3 to 100kg DS3+ to 150kg.
Swingable when not in use and removable only by one bolt leaving just the brakets on boat.
Comes as a kit with pulleys and ropes. 50mm tube, high polish stainless steel 316L. Made in Europe. bow when parked in roller.

Anchor arm also has its function in that the anchor goes out and clear of the bow before it goes down.
Low weight has also been important without it having gone out of the anchor’s holding power, as this is intended to be used on sport fishing boats and other boats which will have as little weight in the bow as possible.

Anchorlift XR anchor is made of the same physical sizes as the famous Bruce anchor, but the weight is only about 60% compared with the Bruce anchor.
Anchorlift XR anchor is made of Aisi 316L high polish stainless steel. European made.

Also available in black.

More information - sizes & weights
DD2 Tilt davit for swim platform

Tilt davit for swim platform. Ideal for dinghy and rib dinghy up to 300cm 100kg.
Made in 25mm stainless steel tubing 316L high gloss polish. Made in Europe

More information - sizes & weights

 

 

 

 

DD2 Diagram

Barracuda - windlass for boats 20ft - 35ft

These Low Profile models take up less space on the deck. Designed for smooth & silent motor/gear operation under the deck. Powerful and compact windlass with capstan for optional warping operation. Vertical shaft in stainless steel. Highspeed drop of up to 40 m (120 ft) per minute. Manual free fall with  adjustable clutch. Stainless steel parts in high polished steel AISI 316L. Long term trouble-free operation. Works with chain only or rope/chain combination.
Model B1012 can also be used on stern windlass systems (Scandinavian marked mainly) and can be used on sailboats up to 42Ft.
and motorboats up to 37Ft.

More information - sizes & weights

Inside Mounting Bracket for Barracuda
Part No 90201

 


Part No:
B912-6 Barracuda 900 SS Low. 900w 12v gypsy 6mm

DIN766 chain Rope 12-14mm
B912-7 Barracuda 900 SS Low. 900w 12v gypay 1/4″HT G43 chain Rope 1/2″
B612-6 Barracuda 900 SS Low. 900w 12v gypsy 6mm

DIN766 chain Rope 12-14mm
B612-7 Barracuda 900 SS Low. 900w 12v gypay 1/4″HT G43 chain Rope 1/2″
Stern installation windlass system:
Sailboats up to 42Ft.
Motorboat up to 37Ft.


 

Download diagram for this windlass

Download Mounting Template

Download Product sheet Barracuda 600-900

Dolphin Low profile - stainless steel - windlass for boats 35ft - 45ft

Ideal for boats 35-45 feet long. These Low Profile models are designed for smooth & silent motor/gear operation under the deck and take up less deck space. Powerful windlass with a new compact motor.Vertical shaft in stainless steel. Highspeed drop of up to 40 m (120 ft) per minute (Dolphin 1200). Manual free fall with adjustable clutch. Stainless steel parts in high polished steel 316L. Long term trouble-free operation. Works with chain only or chain/rope combination.

More information - sizes & weights

Inside Mounting Bracket for Dolphin
Part No: 90203


Part No:
D1012-6 Dolphin 1000 Alu Low. 1000w 12v gypsy 6mm Rope 12-13mm
D1012-8 Dolphin 1000 Alu Low. 1000w 12v gypsy 8mm Din766 Rope 14 – 16mm
D1012-9 Dolphin 1000 Alu Low. 1000w 12v gypsy 5/16″ HT Rope 9/16″ – 5/8″


Download product diagram – Inches

Download product diagram – Metric

Download Mounting Template

Download Product Sheet

Dolphin Low profile - Seawater Resistant Aluminum - windlass for boats 35ft - 45ft

Ideal for boats 35-45 feet long. These Low Profile models are designed for smooth & silent motor/gear operation under the deck and take up less deck space. Powerful windlass with a new compact motor.Vertical shaft in stainless steel. Highspeed drop of up to 40 m (120 ft) per minute (Dolphin 1200). Manual free fall with adjustable clutch. Stainless steel parts in high polished steel 316L. Long term trouble-free operation. Works with chain only or chain/rope combination.

More information - sizes & weights

Inside Mounting Bracket for Barracuda
Part No 90203

 


Part No:
B912-6 Barracuda 900 SS Low. 900w 12v gypsy 6mm

DIN766 chain Rope 12-14mm
B912-7 Barracuda 900 SS Low. 900w 12v gypay 1/4″HT G43 chain Rope 1/2″
B612-6 Barracuda 900 SS Low. 900w 12v gypsy 6mm

DIN766 chain Rope 12-14mm
B612-7 Barracuda 900 SS Low. 900w 12v gypay 1/4″HT G43 chain Rope 1/2″
Stern installation windlass system:
Sailboats up to 42Ft.
Motorboat up to 37Ft.


 

Download product diagram – Inches

Download product diagram – metric

Download Mounting Template

Download Product Sheet

Dolphin High profile - Seawater Resistant Anodized Aluminum - windlass for boats 35ft - 45ft

Ideal for boats 35-45 feet long. These Low Profile models are designed for smooth & silent motor/gear operation under the deck and take up less deck space. Powerful windlass with a new compact motor.Vertical shaft in stainless steel. Highspeed drop of up to 40 m (120 ft) per minute (Dolphin 1200). Manual free fall with adjustable clutch. Stainless steel parts in high polished steel 316L. Long term trouble-free operation. Works with chain only or chain/rope combination.

More information - sizes & weights

 

 

Part No:
DA1012C-6 Dolphin 1000 Alu Low. 1000w 12v gypsy 6mm Rope 12-13mm
DA1012C-8 Dolphin 1000 Alu Low. 1000w 12v gypsy 8mm Din766 Rope 14 – 16mm
DA1012C-9 Dolphin 1000 Alu Low. 1000w 12v gypsy 5/16″ HT Rope 9/16″ – 5/8″


 

Download product diagram

Download Mounting Template

Download Product Sheet

Mako Low profile - Heavy Duty Stainless Steel - windlass for boats 40ft - 75ft

Powerful 1500 & 2000 watt motors, ideal for 40-75 foot boats. These Low Profile models are designed for smooth & silent motor/gear operation under the deck and take up less deck space. Powerful windlass with a new compact motor. With capstan for optional warping operation. Vertical shaft in stainless steel. Highspeed drop of up to 40 m (120 ft) per minute. Manual free fall with adjustable clutch. Stainless steel parts in high polished steel 316L. Long term trouble-free operation. Works with chain only or chain/rope combination.

Mako Low profile - Multiple Mounting Options Stainless Steel - windlass for boats 40ft - 75ft

Powerful 1500 & 2000 watt motors, ideal for 40-75 foot boats. These Low Profile models are designed for smooth & silent motor/gear operation under the deck and take up less deck space. Powerful windlass with a new compact motor. With capstan for optional warping operation. Vertical shaft in stainless steel. Highspeed drop of up to 40 m (120 ft) per minute. Manual free fall with adjustable clutch. Stainless steel parts in high polished steel 316L. Long term trouble-free operation. Works with chain only or chain/rope combination.

More information - sizes & weights

 

Chainpipe left          Chainpipe right

 

The chain pipe can be mounted on the right or left side of the chain stripper, or further in front of the windlass

 

Download product diagram

Download Mounting Template

Mako High profile - Heavy Duty Stainless Steel - windlass for boats 40ft - 75ft

Powerful 1500 & 2000 watt motors, ideal for 40-75 foot boats. Designed for smooth & silent motor/gear operation under the deck. Powerful windlass with capstan for optional warping operation. Vertical shaft in stainless steel. Highspeed drop of up to 40 m (120 ft) per minute. Manual free fall with adjustable clutch. Stainless steel parts in high polished steel 316L. Long term trouble-free operation. Works with chain only or chain/rope combination.

More information - sizes & weights
Mako High profile - Multiple Mounting Options Stainless Steel - windlass for boats 40ft - 75ft

Powerful 1500 & 2000 watt motors, ideal for 40-75 foot boats. Designed for smooth & silent motor/gear operation under the deck. Powerful windlass with capstan for optional warping operation. Vertical shaft in stainless steel. Highspeed drop of up to 40 m (120 ft) per minute. Manual free fall with adjustable clutch. Stainless steel parts in high polished steel 316L. Long term trouble-free operation. Works with chain only or chain/rope combination.

More information - sizes & weights

 

Chainpipe left          Chainpipe right

 

The chain pipe can be mounted on the right or left side of the chain stripper, or further in front of the windlass

 

Download product diagram

Download Mounting Template

Aquarius Low profile - windlass for boats 55ft - 90ft

Estremely powerful 2500 watt motors, and deck unit in Stainless Steel 316L. Both models offer different mounting options; the chain pipe can be mounted left or right of the chain stripper, or further in front of the windlass. With capstan for optional warping operation. Vertical shaft in stainless steel. Highspeed drop of up to 35 m/105 ft per minute. Manual free fall with adjustable clutch. Long term trouble-free operation. The motor/gear under install under the boat’s deck for smooth and silent operation. Works with chain only (no rope or chain/rope combinations).

Aquarius High profile - windlass for boats 55ft - 90ft

Estremely powerful 2500 watt motors, and deck unit in Stainless Steel 316L. Both models offer different mounting options; the chain pipe can be mounted left or right of the chain stripper, or further in front of the windlass. With capstan for optional warping operation. Vertical shaft in stainless steel. Highspeed drop of up to 35 m/105 ft per minute. Manual free fall with adjustable clutch. Long term trouble-free operation. The motor/gear under install under the boat’s deck for smooth and silent operation. Works with chain only (no rope or chain/rope combinations).

More information - sizes & weights